Beautify No-Shine Double-Sided Tape Tabs for Hair Extensions | Walker Tape

Reliable, Pre-Cut Tape Tabs for Seamless Hair Extension Installs

Beautify No-Shine Double-Sided Tape Tabs are trusted by professionals worldwide for their secure hold, hypoallergenic comfort, and discreet matte finish.

Designed for lace and tape-in hair extensions, these tabs are pre-cut for fast application and ideal for stylists who prioritize efficiency and precision.

Performance Features

• Hold Duration: 4–6 weeks
• Finish: Dull (non-reflective – great for lace systems)
• Residue Level: High
• Liner: White (tape is clear)
• Tab Size: 4 cm x 0.8 cm
• Total Quantity: 120 tabs per pack (10 sheets, 12 tabs each)
• Thickness: 0.254 mm
• For Wefts: Up to 4 cm x 1 cm
• Storage Instructions: Store below 32°C, in a cool, dry place

Directions for Use

1. Peel a tab from the sheet by removing the scored liner.
2. Apply the adhesive side to the extension weft or scalp. Avoid touching the adhesive.
3. Repeat for each weft.
4. When ready to install, remove the second liner and press the tab onto clean, dry hair.
5. Use Just-Rite Positioning Spray for precise placement.

Caution: The mesh structure can tear if stretched excessively—handle with care.

Tape-In Hair Extension Care Tips

1. Before Installation

• Shampoo hair using sulfate- and silicone-free shampoo only.
• Make sure the hair is 100% free from oils, conditioners, or sprays.

2. During Installation

• Use a flat iron for 1 second to activate the adhesive.
• Avoid touching the sticky side—keep hands clean and oil-free.

3. After Installation

• Wait at least 48 hours before washing the hair.
• Use sulfate-free shampoo and conditioner only. Never apply conditioner to the tape area.
• Brush starting from the ends, holding the tab securely to avoid pulling.
• Recommend sleeping with a loose ponytail to reduce stress on the extensions.

4. Removal & Reuse

• Use a professional tape-in extension remover solvent.
• Clean the polyurethane base with alcohol before reinstalling.

Note: Results may vary depending on hair texture, scalp oil, and humidity. Request a sample if unsure which tape suits best.

13 FAQs About The Beautify No-Shine Double-Sided Tape Tabs

1. What are Beautify No-Shine Tape Tabs used for?
They are pre-cut, double-sided adhesive tabs used for installing professional tape-in hair extensions.

2. How long do these tabs last once applied?
They provide a hold of 4–6 weeks, depending on body oils, humidity, and care routine.

3. Are these tabs pre-cut, or do I need to trim them?
They come pre-cut in a convenient tab size of 4 cm x 0.8 cm—ready to use.

4. Are these safe for sensitive skin?
Yes, they are hypoallergenic and designed to be gentle on the scalp.

5. Are they suitable for lace extensions?
Absolutely. Their dull finish makes them ideal for lace systems, as they’re non-shiny and discreet.

6. How many tape tabs come in a pack?
Each bag includes 120 tabs, organized in 10 sheets of 12 tabs each.

7. What’s the residue level after removal?
The tape is considered high residue, so using a proper solvent and alcohol for cleaning is recommended.

8. Should I apply heat during installation?
Yes. A quick pass with a flat iron for one second will help activate the adhesive for a stronger hold.

9. Can I wash my hair right after the install?
No. Wait 48 hours after installation before washing your hair to allow the adhesive to set.

10. Can I reuse the same tape tabs?
No. These are single-use only. For reinstallation, new tabs must be applied.

11. Do they work in humid climates?
Yes, but the performance may vary. For humid or oily scalps, consider testing before full use.

12. How do I remove the tabs?
Use a Walker Tape remover solvent, then clean the extension base with alcohol before reapplying.

13. How should I store the unused tabs?
Keep them cool and dry, stored below 32°C, away from heat and direct sunlight.