Extenda-Bond Plus Double-Sided Tape Roll with Holes for Hair Systems | Walker Tape

Extenda-Bond Plus Double-Sided Tape Roll with Holes combines an acrylic-based adhesive formula with innovative design to deliver unbeatable strength, durability, and comfort for hair replacement systems.

Ideal for lace, skin, or mono bases, this tape roll allows you to cut custom lengths for precise installations.

Key Features

Acrylic-Based Adhesive: Provides exceptional tackiness and flexibility while resisting breakdown.

Distinctive Perforations: Tiny holes in the tape allow the scalp to breathe, perfect for hot, humid conditions or clients who sweat heavily.

Maximum-Wear Category (2–4+ Weeks): Rated for a four-week hold under typical use and can last up to six weeks depending on temperature, humidity, and body oils.

Fingerprint Technology: Embedded textured pattern creates a matte finish that prevents shine and makes the tape virtually invisible under any hair system.

Stretchy Carrier: Urethane film molds to the scalp’s contours for a comfortable, secure fit.

Clear Tape & Blue-and-White Liner: The transparent tape integrates effortlessly with all hair colors and skin tones, while the liner's color coding facilitates efficient positioning.

Specifications

System Compatibility: Suitable for all hair system bases (lace, skin, mono, etc.).

Hold Duration: 4 weeks (maximum wear), with the potential to last up to 6 weeks under ideal conditions.

Finish: Semi-dull (minimizes shine).

Residue Level: High (for extra-secure adhesion).

Carrier Material: Stretchy urethane film (flexible and breathable).

Liner: Blue and white pattern (for easy alignment).

Tape Color: Clear (invisible under the unit).

Thickness: 0.2667 mm.

Roll Format: Cuts to any length—ideal for customized installations.

Storage: Keep at room temperature, below 32 °C (90 °F).

Directions for Use

1. Cut Desired Length: Unroll the tape and slice off the necessary length for your application.
2. Peel the Liner: Carefully remove the blue-and-white liner without touching the adhesive surface.
3. Position on the Hair System: Place the exposed adhesive side onto the underside of the system where maximum hold is required.
4. Repeat as Needed: Apply additional strips around the perimeter or high-tension areas to reinforce hold.
5. Secure to the Scalp: Press the hair system onto the scalp, ensuring each taped section adheres fully.
6. Optional Positioning: For precise alignment, especially with delicate lace, apply Just-Rite Positioning Spray before pressing the unit down.

Breathability & Comfort

Perforated Design: The distinctive holes allow air to circulate against the scalp, reducing moisture buildup and irritation.

Flexible Carrier: The stretchy urethane material moves naturally with the head, preventing lift and edge peeling, even on flexible lace bases.

Skin Safe: The acrylic formula and carrier are gentle on sensitive scalps, ensuring extended wear without discomfort.

Hold Time & Performance

Maximum Wear: Extenda-Bond Plus belongs to the top-tier hold category (2–4+ weeks).

Under optimal conditions—moderate temperature, controlled humidity, and normal body oils—the tape can maintain adhesion for up to six weeks.

Application Skill: Due to its high tackiness, professional installation is recommended.

If repositioning is required after adhesion, remove and replace the tape to avoid reducing hold time (skin-cell residue can weaken the bond).

Walker Tape Fingerprint Technology

Matte Finish: Fingerprint texturing eliminates any glossy shine, ensuring a natural, undetectable appearance under bright lights or direct sunlight.

Invisible Under All Units: Whether you work with lace, mono, or skin bases, the fingerprint technology keeps the tape discreet.

Post-Installation Tips

Wait 24 Hours Before Water or Sweat Exposure
Instruct clients to avoid showering, swimming, or exercising for 24 hours to allow the adhesive to reach peak strength.

Use a Swim Cap or Scalp Protector for Early Water Exposure
If a client needs to get wet sooner, recommend Max Hold Sport scalp protector or a snug swim cap to preserve initial adhesion.

Avoid Adjusting Set Tape
Sliding or lifting installed tape traps skin cells under the adhesive and compromises future hold.

Use Just-Rite Positioning Spray for minor alignment adjustments.

Extenda-Bond Plus Double-Sided Tape Roll with Holes offers a combination of breathability, long-lasting hold, and near-invisible finish, making it the go-to choice for professionals and clients seeking top-tier performance from their hair system adhesive.

13 FAQs About Extenda-Bond Plus Double-Sided Tape Roll with Holes

1. What is the Extenda-Bond Plus Tape Roll with Holes used for?
It’s a premium maximum-wear adhesive tape roll designed for all hair system types, including lace, skin, and mono bases. It’s breathable, flexible, and ideal for long-term wear.

2. How long does the tape hold last?
It offers a 4-week hold on average, and under ideal conditions—moderate temperature, controlled humidity, and low oil—it can last up to 6 weeks.

3. Is the tape visible under the hair system?
No. The tape itself is clear with a semi-dull matte finish using Walker Tape’s fingerprint technology, making it virtually invisible under all base types.

4. Is it breathable for the scalp?
Yes. The perforated holes throughout the tape allow airflow, reducing moisture buildup and irritation, especially useful in hot or humid environments.

5. What does the blue-and-white liner do?
The blue-and-white liner is for alignment only and is not part of the adhesive. It makes positioning the tape easier but peels off cleanly to reveal the clear adhesive underneath.

6. Can I cut the tape to custom sizes?
Absolutely. The roll format allows you to cut any length needed, making it ideal for customized tape applications.

7. What are the tape’s dimensions and thickness?
Thickness: 0.2667 mm.
Length: Custom-cuttable from the roll.
Carrier Material: Stretchy urethane film for flexibility and durability.

8. Will this tape irritate sensitive skin?
No. The acrylic-based adhesive is skin-safe, gentle, and suitable for extended wear without irritation.

9. Can I reposition the tape after applying it?
Repositioning is not recommended once applied. If needed, remove and reapply a fresh piece—adjustments can trap skin cells and reduce adhesion.

10. When can the client shower or exercise after installation?
Clients should wait at least 24 hours before exposure to water, sweat, or steam to ensure the adhesive cures fully.

11. What if water exposure is needed immediately after installation?
Use Max Hold Sport Scalp Protector or recommend a tight swim cap to help preserve early-stage adhesion in case of immediate moisture exposure.

12. Does the tape leave residue?
Yes, it’s a high-residue tape for maximum hold. It’s best removed using a professional adhesive remover, followed by alcohol for final cleanup.

13. Can this tape be used with all hair system bases?
Yes. It is fully compatible with lace, mono, polyurethane (skin), and hybrid base systems, offering consistent performance across all materials.